Table: cnotas, rows: 168

Página 4 de 9

131JOOMLA error loading feedsPara quitar el mensaje, hay que acceder al gestor de módulos - pestaña "administración".
despublicar "Joomla! Security Newsfeed"
130Network wireless USB Adapter Edimax EW-7711UMnFor Karmic (ubuntu 9.10), add "blacklist rt2800usb" to /etc/modprobe.d/blacklist.conf and reboot system
Man braucht 2 Konsolen:

In der ersten führt man folgendes aus:

sudo -i
while true; do killall -9 vmware-modconfig-console; sleep 1; done

In der zweiten startet man den Installer:

sudo ./VMware-Workstation-6.5.3-185404.x86_64.bundle --ignore-errors

Nach der Installation stopt man den Befehl in der ersten Konsole mit “Strg+c” und führt folgendes aus:

vmware-modconfig --console --install-all
128Network-manager resolv.confIt is really simple. Edit /etc/dhcp3/dhclient.conf and add the following line in there:

prepend domain-name "";

Datenbank mysql

web page

mysql comands

126mysql start daemon problemCan't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)'

This message usually means that networking option is disabled in my.cnf file. To fix this: go to /etc/mysql/my.cnf, comment out the configuration item of skip-networking, then restart your mysql server.


#bind-address =
125aptitude Uninstalling apps$ sudo aptitude --purge remove program_name
124Networking Configuration Using Command Linedisable NetworkManager permenently
$ sudo update-rc.d NetworkManager remove

That will take it out of the system startup. If you truly want to remove it you can
$ sudo apt-get remove NetworkManager

Configuring Static IP address for your network card
eth0 renamed to eth1, eth2, eth3, ... in domU

Evidently the gutsy domU, noticing that eth0 had a different MAC address than the "saved eth0 MAC address", assigns a brand new eth# and saves the MAC address with the new interface number.


1. Edit /etc/udev/rules.d/70-persistent-net.rules in the domU.
2. Remove dynamically generated lines.
3. Add:

SUBSYSTEM=="net", DRIVERS=="vif", ATTRS{nodename}=="device/vif/0", NAME="eth0"

4. Shut down the domU and restart it.

If you want to configure Static IP address you need to edit the /etc/network/interfaces and you need to enter the following lines replace eth0 with your network interface card

sudo vi /etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static

After entering all the details you need to restart networking services using the following command

sudo /etc/init.d/networking restart

if you don't see lo in ifconfig do:

# ifup lo

Setting up Second IP address or Virtual IP address in Ubuntu

If you are a server system administrator or normal user some time you need to assign a second ipaddress to your Ubuntu machine.For this you need to edit the /etc/network/interfaces file and you need to add the following syntax.Below one is the only example you need to chnage according to your ip address settings

sudo vi /etc/network/interfaces

auto eth0:1
iface eth0:1 inet static
network x.x.x.x
broadcast x.x.x.x
gateway x.x.x.x

You need to enter all the details like address,netmask,network,broadcast and gateways values after entering all the values save this file and you need to restart networking services in debian using the following command to take effect of our new ipaddress.

After entering all the details you need to restart networking services using the following command

sudo /etc/init.d/networking restart

Setting your ubuntu stytem hostname

Setting up your hostname upon a ubuntu installation is very straightforward. You can directly query, or set, the hostname with the hostname command.

As an user you can see your current hostname with

sudo /bin/hostname


To set the hostname directly you can become root and run

sudo /bin/hostname newname

When your system boots it will automatically read the hostname from the file /etc/hostname

If you want to know more about how to setup host name check here

Setting up DNS

When it comes to DNS setup Ubuntu doesn’t differ from other distributions. You can add hostname and IP addresses to the file /etc/hosts for static lookups.

To cause your machine to consult with a particular server for name lookups you simply add their addresses to /etc/resolv.conf.

For example a machine which should perform lookups from the DNS server at IP address would have a resolv.conf file looking like this

sudo vi /etc/resolv.conf

enter the following details


service swat
port = 901
socket_type = stream
wait = no
only_from = localhost
user = root
server = /usr/sbin/swat
log_on_failure += USERID
disable = no

service swat
port = 901
socket_type = stream
wait = no
only_from = localhost
user = root
server = /usr/sbin/swat
log_on_failure += USERID
disable = no
121apt-get update. # dpkg --configure -a
# apt-get update
120SLC DNS settings# in /etc/sysconfig/network-scripts/ifcfg-eth0 like so:
119screen settings$ xset -q
$ man xset
118Trash in /idisk for delete files# mkdir /idisk/.Trash-1000
chown martinez:1000 /idisk/.Trash-1000/
117JOOMLA Install PachCopiar con rsync

# cd /idisk/Joomla/Origins/
# rsync -alrv Pach_1.5.9_to_1.5.10/Joomla_1.5.9_to_1.5.10-Stable-Patch_Package/ /idisk/Joomla/joomlaCarmen
116Adobe Flash plugin für Firefox unter Ubuntu 9.04 und 9.10 installierencmdln:

1.) unter das paket .deb für Ubuntu 8.04+ auf Desktop speichern
2.)sudo apt-get remove --purge flashplugin-nonfree
3.) cd /home/spegu/Desktop/
4.)sudo dpkg -i install_flash_player_10_linux.deb
5.) Firefox neu starten
6.) about:plugins in Adresszeile eingeben und Installation überprüfen
7.) Unter Flash Player überprüfen.

How to install Adobe Flash Plugin 64 Bit for Ubuntu 9.04

Download it from :-

Unpack the archive and copy the only file ( to the Firefox plugins folder in ‘/usr/lib/firefox-addons/plugins‘ :-

Für ubuntu 10.4

# export http_proxy=""
# apt-get install flashplugin-installer
Si esto no va


# wget

# tar xvfz flashplayer_square_p1_64bit_linux_091510.tar.gz
# sudo mv /usr/lib/mozilla/plugins/
# ln -s /usr/lib/mozilla/plugins/ /usr/lib/mozilla-firefox/plugins/

114ROOT-Cern installationget the sources of the latest ROOT

instal gcc und c++ compilers



apt-get install subversion dpkg-dev make g++ gcc binutils libx11-dev libxpm-dev libxft-dev libxext-dev

sudo ln -s /usr/lib/x86_64-linux-gnu/ /usr/lib/
sudo ln -s /usr/lib/x86_64-linux-gnu/ /usr/lib/
sudo ln -s /usr/lib/x86_64-linux-gnu/ /usr/lib/


$tar xvzf root._version.tar.gz
$cd root

Linux Mint 12 Lisa:

edit file configure

# enable_asimage \ disabled by L.Martinez

options=" \
enable_afdsmgrd \
enable_afs \
enable_alien \
enable_alloc \
enable_astiff \
enable_bonjour \



# mkdir /usr/local/bin/cern

# cp -r root /usr/local/bin/cern

set ROOTSYS to the `root' directory in /etc/profile:
export ROOTSYS=/usr/local/bin/cern/root
export PATH=$ROOTSYS/bin:$PATH
113scanner Agfa e52Down load driver scape52.bin

copy it to /usr/share/sane/snapscan/

edit /etc/sane.d/snapscan.conf

firmware /usr/share/sane/snapscan/snape52.bin
/dev/usb/scanner0 bus=usb

make node for scanner
mkdir /dev/usb (if not exists)
mknod /dev/usb/scanner0 c 180 48

112Fedora play MP3ssu -

Configuring Package Installation available from rpmfusion:

rpm -Uvh

Using the GUI to Install/Update Software

yum install PackageKit

install the correct plugin for which MP3 player you want to use:

yum install gstreamer-plugins-ugly
111Fedora install Flash in web browsersu -

Install the Adobe repository for yum:

rpm -Uvh

yum install flash-plugin nspluginwrapper.{i386,x86_64} pulseaudio-libs.i386 alsa-plugins-pulseaudio.i386 libcurl.i386

Configure your browser to see the plugin:

mozilla-plugin-config -i -g -v